AMPLIFICATION
Channel Separation (Crosstalk)
-70 dB typical at 1 kHz

Frequency Response
20 Hz – 20 kHz (±1.0 dB), 1 W at 8 Ω

Gain, Low-Impedance
26 dB, 29 dB, 32 dB, 35 dB, selectable

Maximum Peak Power, Asymmetrical
2200 W at 2 Ω, 4 Ω, 8 Ω, 70V, 100V

Maximum Peak Power, Symmetrical
800 W at 2 Ω / 600 W at 4 Ω, 8 Ω, 70V, 100V

Number of Channels
4

Power Class
Class D

Rated Power, Asymmetrical
1100 W at 2 Ω / 1100 W at 4 Ω in 70V mode / 1100 W at 8 Ω in 100V mode / 1100 W at 70V, 100V

Rated Power, Symmetrical
400 W per channel at 2 Ω / 300 W per channel at 4 Ω, 8 Ω, 70V, 100V

SNR
> 104 dB (A-weighted)

THD+N
< 0.1% (< 0.05% typical, from 0.1 W to half-power)

AUDIO INPUTS, ANALOG
Channels
4 balanced, line

Connectors
(1) 6-pin Euroblock

Input Impedance
20 kΩ

Maximum Input Level
20 dBu

Sensitivity
2.48 Vrms at 26 dB gain, 1.76 Vrms at 29 dB gain, 1.24 Vrms at 32 dB gain, 0.88 Vrms at 35 dB gain

AUDIO INPUTS/OUTPUTS, DIGITAL
Channels
4 Dante in

Connectors
(1) RJ-45 Dante in

Type
6-pin Euroblock

AUDIO OUTPUTS, ANALOG
Channels
4

Connectors
(1) 8-pin Euroblock, 7.62 mm

COMPLIANCE
EMC
This product meets all EN55103-2 immunity requirements for E2 electromagnetic environment.

ELECTRICAL
Current Draw, Idle
0.45 A at 115 VAC, 60 Hz / 0.25 A at 230 VAC, 50 Hz

Mains Connector
IEC C20 inlet

Mains Voltage
100–240 VAC (±10%), 50/60 Hz

Protections
High temperature, DC, output short circuit, high frequency, excessively low/high AC mains voltage, inrush current, clip, peak, long-term/RMS

Power Consumption
31.1 W idle, 251 W maximum at 1/8 power at 4 Ω

GENERAL
Computer Interface Connection
RJ-45 (Ethernet)

Notification Outputs
(1) 12-pin Euroblock (3 pins per channel), general purpose

Software Applications
ControlSpace Designer 5.12 or later (Windows)

INDICATORS AND CONTROLS
Controls, Front Panel
(1) power button, (1) soft reset button, (1) hard reset button, (1) check button, (4) channel attenuation controls