Two-Way 8 inch (200mm) Coaxial Mushroom Landscape Speaker

Designed for outdoor applications, the highly weather resistant Control 80 Series Landscape speakers provide excellent full-range sound quality and 360 degree coverage. Designed to be mounted on or in the ground, Control 80 Series Landscape speakers can be used in a wide variety of applications including shopping malls, theme parks, sports venues, hotels, casinos, resorts, restaurants, hospitality and leisure venues, entrance ways, and anywhere a high quality music and/or paging speaker landscape speaker is required. Compact in design, the speaker is unobtrusive and easily blends in with its surroundings. A tough polyethylene enclosure resists abuse from lawn care equipment and the elements, and the enclosure color extends throughout the material so the speaker will maintain color even when scraped or scratched.

Technical Spesification :

Frequency Range (-10dB) : 47 Hz – 16 kHz

Power Rating : 240 W Continuous Program (2 hrs) 120W (480W peak), Continuous Pink Noise (2 hrs) 100W (400W peak) Continuous Pink Noise (100 hrs)

Transformer Taps : 70V: 60W, 30W, 15W & 7.5W 100V: 60W, 30W, 15W

Frequency Response (±3 dB) : 60Hz - 15 kHz

Maximum Input Voltage : 28.0 V

Sensitivity : 87 dB, 1W @ 1m (ave. 80Hz - 16kHz)

Coverage Pattern : 360° H, 160° V (primary listening 10° to 50° up from ground)

Directivity Factor (Q) : 2.1

Directivity Index (DI) : 3.2 dB

Maximum SPL (1m) : 108 dB

Impedance : 8Ω (at 8Ω setting)

Minimum Impedance : 6.6Ω at 9.5kHz

Insertion Loss : <0.5 dB at any tap setting

Thru Setting : 8Ω nominal

Crossover Type  : 2nd Order LPF on LF and 2nd Order HPF on HF

Recommended Protective High-Pass : 45 Hz for 8Ω operation, 24 dB/oct 80 Hz for 60W tap, 24 dB/oct 50 Hz for 30W, 7.5W, and 7.5W taps, 24 dB/oct

Drivers  : LF: 200 mm (8.00 in) diameter LF driver, Kapton™ former, 38mm (1.5 in) voice coil, polypropylene cone and polyurethane surround, HF: 25mm (1.0 in) diameter HF driver Polyetherimide (PEI) dome.

Enclosure : LDPE Polyethylene plastic, 6 mm wall thickness, UL94V-0 rated.

Grille : Powder coated stainless steel.

Outdoor Capability : IP-56 rating per IEC529 (dust protected and protected against jets of water). Exceeds MilSpec 810 for humidity, salt spray, temperature & UV. Passes Mil-STd-202F for salt spray. Enclosure UL94V0 rated.

Safety Agency : UL1480, Transformer UL Recognized per UL1876, ROHS compliant.

Input Connectors : Bare wire with dielectric-gel-filled wire nuts (internal to top speaker section)

Wiring   : Water ingress protected by two stages of gland nuts, one mounted on outside of enclosure (installed by installer via drilling 22 mm (0.875 in, 7/8 in) hole in any of multiple provided locations) and one between the bottom base and top speaker sections. Included gland nuts require round-jacketed wire with outside diameter between 4.0 mm and 9.0 mm (0.16” in and 0.35” in). For Installation instructions, see Installation Guide (#IS-C80MLS).

Colors : Hunter Green, RAL6018

Dimensions (H x W x D)  : 524 x 355 x 355 mm (20.7 x 14 x 14 in.)

Net Weight (each) : 7.8 kg (17 lb)

Shipping Weight : 10.5 kg (23 lb)

Included Accessories : (2) wire nuts, (2) gland nuts, (1) right-angle screwdriver

Installer-Supplied Required Tools : 22mm (0.875 in, 7/8 in) twist-type drill bit (or other type suitable for plastic) for installing gland nut into enclosure.

Optional Accessories : 22mm (0.875 in, 7/8 in) twist-type drill bit (or other type suitable for plastic) for installing gland nut into enclosure.