AMPLIFICATION
Channel Separation (Crosstalk)
> 80 dB at 1 kHz, > 65 dB at 20 kHz

Dynamic Range
≥ 100 dB at rated power, A-weighted

Frequency Response
20 Hz – 20 kHz (±1 dB) at 1 W, 4–8 Ω / 20 Hz – 20 kHz (±1 dB) at 1 W with 50 Hz high-pass filter, 70/100V

Gain, High-Impedance
35 dB, 70V mode / 38 dB, 100V mode

Gain, Low-Impedance
29 dB

Maximum Peak Power, Symmetrical
300 W

Number of Channels
4

Power Class
Class D

Rated Power, Symmetrical
150 W

THD+N
< 0.04% at 1 kHz, 4–8 Ω, 70V/100V

AUDIO INPUTS, ANALOG
Channels
4 balanced, 2 unbalanced

Connectors
(3) 3-pin Euroblock, (1) 4-pin Euroblock, (2) RCA stereo pairs

Input Impedance
10 kΩ

Maximum Input Level
22 dBu at 14 dBu sensitivity

Sensitivity
-10 dBV, 4 dBu, 14 dBu

AUDIO OUTPUTS, ANALOG
Channels
6 (4 loudspeaker + 2 auxiliary)

Connectors
(1) 8-terminal block, (1) 3-pin Euroblock, line

COMPLIANCE
EMC
This product meets all EN55103-2 immunity requirements for E2 electromagnetic environment.

ELECTRICAL
Mains Connector
IEC C14 inlet

Mains Voltage
100–240 VAC (±10%), 50/60 Hz

Power Consumption
25 W auto-standby, 325 W maximum

GENERAL
Computer Interface Connection
RJ-45 (Ethernet)

Software Applications
PowerSpace+ Configuration Utility (web browser)

System Requirements
Google Chrome 64.0.3282.140 or later / Mozilla Firefox Quantum 58.0.2 or later / Microsoft Internet Explorer 11.2007.14393.0 or later / Microsoft Edge 38.14393.1066.0 or later

INDICATORS AND CONTROLS
Controls, Front Panel
(1) power LED, (1) input signal LED, (1) output limit LED

Controls, Rear Panel
RJ-45 remote input for ControlCenter CC-1, CC-2 and CC-3 zone controllers, mute, output attenuators

LED Status Indicators
(1) power/status LED, (4) input signal LEDs, (4) output limit LEDs

INTEGRATED DSP
A/D and D/A Conversion
48 kHz / 24-bit

Audio Latency
< 1 ms, analog input to analog loudspeaker output

Crossover Types
Butterworth 6 (±6 dB/octave), Butterworth 12 (±12 dB/octave), Butterworth